Pages

Namer APC on Merkava chassis

"נמר"
  נושא גייסות משוריין על בסיס תובת מרכבה










Based on the lessons learned in Lebanon since 1982, the IDF has pursued the development of heavy armored personnel carriers capable of keeping pace with the Merkava tanks while withstanding the same levels of threats. Initially, the IDF converted turretless T-55 and Centurion hulls into heavy APCs. These vehicles were produced in limited numbers and used extensively during the later years of the Israeli – South Lebanese conflict. The IDF has also used these heavy APCs in Gaza, supporting operations around and inside heavily populated areas, and patrolling the border areas around the Gaza strip.

However, according to initial analysis done by the Merkava Program Office (MPO, also called Mantak in Hebrew), the Merkava chassis is far more suitable for this task than the T-55 or Centurion hulls. The Merkava’s forward mounted engine leaves room for a large rear access ramp, and provides a spacious internal configuration for the fighting compartment. The flat roof provides effective observation from closed hatches, and flexible and efficient installations for payloads and remotely controlled weapon stations. The superior base armor and the availability of add-on armor modules provides a Merkava based APC with a protection level unprecedented among contemporary AIFVs.


As part of the evolution of the Merkava family, this main battle tank chassis will further evolve into a family of heavily armored vehicles, designed for multi-mission operations in high and low-intensity warfare. MPO produced several versions of Merkava based APCs, called Namer (Leopard in Hebrew), utilizing existing chassis of various Merkava models. Two armored infantry carriers were produced fitted with advanced modular Merkava armor and providing accommodation for 12 men: commander, driver, weapon station operator and eight fully equipped troops. The hatch for the driver’s station has been removed and that area provided with additional armor to the top and sides of the vehicle. The underside is reinforced by a belly plate to protect against mines. Remotely controlled weapon stations mounting 7.62mm and M2 heavy machineguns were installed with associated optronics and fire control systems. As in the Merkava Mk 3 LIC, the Namer will have a sniper port located in the rear access door ramp.

The new vehicles will enable effective operation in "buttoned up" conditions over extended durations, offering spacious interiors and rapid access and dismounting of troops. For medical evacuation under fire, every Namer will be fitted for collapsible stretcher carriage to facilitate rapid and efficient battlefield MEDEVAC operations. Safety equipment includes blast-absorbing seats for the crew and an internal fire suppression system. Another version with an elevated, remotely controlled mount carrying a 30mm gun has also been tested.





No comments:

Post a Comment